+91 97417 39487 | 
contact@popularcert.com
Improve Standards & Market Access with ISO 17025 & ISO 13485 Certification in Mwanza
Compliance and quality management of an organization’s processes and products is one of the primary goals within the medical devices industry. This is achieved through two critical certifications, ISO 17025 and ISO 13485, which facilitate this objective. While ISO 17025 is concerned with the accreditation of Testing and Calibration Laboratories, ensuring the validity of the results produced, ISO 13485 is concerned with a quality management system (QMS) in the design and manufacturing processes of Medical Devices, focusing on regulatory compliance as well as risk mitigation. These measures not only improve product quality but also compliance from other jurisdictions as well as build in a culture of continual improvement, which adds to competitiveness in the market.
Exploring the Link Between ISO 17025 and ISO 13485:
Both ISO 17025 and ISO 13485 are considered international standards, and complying to both simultaneously has positive effects on the quality of medical devices. The two are related in the following manner:
- ISO 17025: Studies the proficiency of the testing and calibration and establishes the laboratory’s capability to produce authentic and dependable output.
- ISO 13485: Defines a set of a quality management system (QMS) requirements intended for medical devices (design and manufacture) focusing on adherence to laws and regulations and the management of risks associated.
Combining these standards results in several advantages that are as follows:
- Better Product Value: ISO 17025's specific approach to testing and ISO 13485's Integrated Quality Management System (QMS) combine to provide maximum quality assurance for medical devices.
- Legal Compliance: Both standards help comply with other international requirements which minimizes the chance of non-compliance and it's fines as a punishment.
- Issue Management: The combination of ISO 13485’s risk management and ISO 17025’s reliable testing gives a much greater assurance that potential problems will be discovered and resolved.
- Competitive Positioning: Companies will gain more credibility and have higher chances of being trusted by customers and therefore gain broader markets after attaining both standards.
Establishing ISO 17025 Certification in Mwanza within the quality management system (QMS) of a medical device manufacturer is often challenging, yet rewarding. ISO 13485 describes the general QMS while ISO 17025 describes the laboratories’ role in testing which impacts laboratory processes integration without overlap redundancy. Both standards will need careful consideration.
In addition, obtaining an ISO 17025 accreditation can be lengthy and include time delays of five months to over a year due to method development and approval delays. Even with those setbacks, the combination of ISO 13485 and ISO 17025 encourages a positive environment with a focus on solving issues and increasing effectiveness within an organization that makes medical devices.
Types Of Certification
- ISO Certification
- ISO 9001 Certification
- ISO 14001 Certification
- ISO 45001 Certification
- ISO 22000 Certification
- ISO 27001 Certification
- ISO 17025 Certification
- ISO 13485 Certification
- ISO 20000-1 Certification
- ISO 22301 Certification
- ISO 50001 Certification
- ISO 37001 Certification
- IATF 16949 Certification
- ISO 29001 Certification
- ISO 31000 Certification
- ISO 20121 Certification
- ISO 10002 Certification
- ISO 41001 Certification
Get Free Consultation
Our Clients
Unveiling the relationship between ISO 17025 and ISO 13485 certification:
- Merging Of Relating Aspects Standards: Medical device manufacturers are often required to comply to both standards in order to access the global market.
- Implementation of Integrated Standards: Both employ risk management principles in ensuring safety and effectiveness in the testing of medical devices.
- Overlap Collaboration: Vendors under ISO 13485 rely on Ace laboratories for precise tests and measurements performed in ISO 17025 accredited laboratories.
- Activate Compliance: Adopting both standards assures quality, regulatory compliance, and market competitiveness.
Each of ISO 17025 and ISO 13485 serve different but complementary functions in the medical device testing process. The former focuses on laboratory quality testing while the latter focuses on quality management of the devices. Together, they facilitate compliance with international standards.
Compliance with ISO 17025 enhances the credibility of test results for regulatory submissions by medical device companies which makes it easier for them to meet safety requirements, therefore minimizing chances of non-compliance and product recalls. Manufacturers are also able to build trustworthy relations with the regulators as well as improve effectiveness internally through integration of these standards.
Businesses in Mwanza that gain advantages from ISO 17025 and ISO 13485 Certification:
Gains from certification in ISO 17025 are enlisted below:
- Increased Trust: Trust from customers and government agencies is earned through proof of accreditation because it confirms technical capability.
- Better Accuracy: Standardized methods guarantee accurate test results, which are essential for making sound decisions.
- Global Acceptance: Adhering to international benchmarks allows entry into foreign markets.
- Focus of Progress: Many audits improve the processes within the laboratory.
Gains from certification in ISO 13485 are enlisted below:
- Adherence to Legislation: Guarantees that products comply with global requirements for medical devices.
- Market Protection: Controls and limits the number of risks associated with a product during its entire life span.
- Market Entry: This certification is mandatory in most international economies.
- Client Assurance: Guarantees clients that products offered to them are reliable in terms of quality and safety.
In Mwanza, the NFQCLAB, TMDA Lake Zone Laboratory, and SGS Tanzania laboratories have high-quality standards of service delivery. These institutions have been registered as ISO 17025 centers on international quality standards, increasing their reliability and guarantee that services and products will meet international set minimum requirements.
In the case of businesses dealing with the manufacture of medicine devices, obtaining ISO 13485 certification is a necessity. This certification is an expression of commitment towards quality management and helps to meets international standards while gaining customer confidence. In sum, these certifications aid in the improving the economy of Mwanza as well as the public healthcare standards.
Popularcert: Your Reliable Partner for Achieving Certification Success
PopularCert is a trusted partner who can help you achieve international certifications with ease. Their services include helping increase operational efficiency and enhancing associated credibility in the market. Businesses that meet international standards can make the most of these opportunities and achieve sustainable growth.
Deeply committed to providing the best services, PopularCert guarantees assistance for those looking to get certified. This feature, along with their customer-centric approach, makes them stand out among other PopularCert clients. When you choose PopularCert, you can be sure you are prioritizing your business’s reputation and compliance issues above everything else.
Take the next step:
Combining ISO 17025 certification with the ISO 13485 Certification in Mwanza for medical device manufacturers seeks to improve product quality, strengthen regulatory compliance, and increase competitiveness in the market. The latter focuses more on meeting the compliance and risk management aspects while the former focuses on the compliance the quality management system also targets during the design and manufacture of medical devices. Having these standards helps improve the organization’s operational efficiency but also arms the organization with the ability to improve the safety and effectiveness of their devices.
GET A FREE CONSULTATION NOW
FAQ
How do ISO 17025 and ISO 13485 differ, and how can they be integrated?
ISO 17025 focuses on the competence of testing and calibration laboratories, ensuring they produce valid and reliable results. ISO 13485 specifies requirements for a quality management system (QMS) in the design and manufacture of medical devices, emphasizing regulatory compliance and risk management. Integrating these standards involves aligning laboratory processes with the overall QMS, ensuring accurate testing supports product quality and compliance. This integration requires careful planning to avoid redundancy and ensure that laboratory activities are effectively incorporated into the broader quality framework.
Is ISO 17025 accreditation necessary for medical device manufacturers already certified to ISO 13485?
While ISO 13485 covers general quality management requirements for medical device manufacturers, ISO 17025 is specific to testing and calibration laboratories. Manufacturers with in-house testing laboratories may pursue ISO 17025 accreditation to demonstrate the technical competence of their labs. However, if testing is outsourced to external laboratories, it’s essential to ensure these labs are ISO 17025 accredited to guarantee the reliability of test results.
How does ISO 17025 accreditation benefit medical device manufacturers?
ISO 17025 accreditation ensures that a laboratory operates competently and generates valid results, enhancing confidence in its testing and calibration services. For medical device manufacturers, this accreditation supports product quality by ensuring accurate and reliable testing, which is crucial for verifying product safety and efficacy. Additionally, it facilitates compliance with regulatory requirements, as many regulatory bodies recognize ISO 17025 accreditation as evidence of a laboratory’s competence.